|                 |              
The main thing to remember about the use of a gold pan is that while it  is very effective as a gold-catching device, it can only process a  limited volume of streambed material. For this reason, the gold pan is  normally not used as a production tool in commercial use, other than in  the most remote locations where it would be very difficult to haul large  pieces of equipment, and where there is only a small amount of  streambed material present -- which is paying well enough to make the  panning worthwhile.     
The gold pan is most commonly used to locate a richer paying area by                   sampling,          so that larger production equipment can be brought into that location to          work the ground to recover more gold.
There are stories in the    old mining records about the ground being so          rich during the 1849 gold rush that as much as 96 ounces of gold were          recovered from a single pan. That is $100,000+ at today’s rate of          exchange, and must have been some very rich ground indeed!
Stories like that are rare and pay-dirt like that is not run  across very often. However, it is not too uncommon to hear of  prospectors today who are able to consistently produce better than an  ounce of gold per week with a gold pan in the high country, and have the  gold to show for it. Some do better, but these prospectors have usually  been at it for awhile and have located hot spots. I personally know of  two guys who support themselves with a gold pan, and one of them lives  pretty well. As mentioned earlier, the gold pan gives you unlimited  accessibility, and these prospectors look around to find the pockets in the    exposed bedrock  along the edges of the creek-beds in their areas, picking up a few  pieces here, a few there, and a little pocket of gold once in awhile. It  adds up, and to them it is better than punching a time clock.
There is still plenty of rich ground          to be found in gold country if you are willing to do the work involved          in finding it.
|                 |              
The main thing to remember about the use of a gold pan is that while it  is very effective as a gold-catching device, it can only process a  limited volume of streambed material. For this reason, the gold pan is  normally not used as a production tool in commercial use, other than in  the most remote locations where it would be very difficult to haul large  pieces of equipment, and where there is only a small amount of  streambed material present -- which is paying well enough to make the  panning worthwhile.     
The gold pan is most commonly used to locate a richer paying area by                   sampling,          so that larger production equipment can be brought into that location to          work the ground to recover more gold.
There are stories in the    old mining records about the ground being so          rich during the 1849 gold rush that as much as 96 ounces of gold were          recovered from a single pan. That is $100,000+ at today’s rate of          exchange, and must have been some very rich ground indeed!
Stories like that are rare and pay-dirt like that is not run  across very often. However, it is not too uncommon to hear of  prospectors today who are able to consistently produce better than an  ounce of gold per week with a gold pan in the high country, and have the  gold to show for it. Some do better, but these prospectors have usually  been at it for awhile and have located hot spots. I personally know of  two guys who support themselves with a gold pan, and one of them lives  pretty well. As mentioned earlier, the gold pan gives you unlimited  accessibility, and these prospectors look around to find the pockets in the    exposed bedrock  along the edges of the creek-beds in their areas, picking up a few  pieces here, a few there, and a little pocket of gold once in awhile. It  adds up, and to them it is better than punching a time clock.
There is still plenty of rich ground          to be found in gold country if you are willing to do the work involved          in finding it.
No comments:
Post a Comment